| 基于UG的康复轮椅设计与仿真分析 |
| |
| 引用本文： | 金文宇. 基于UG的康复轮椅设计与仿真分析[J]. 机械, 2013, 0(12): 67-69 |
| |
| 作者姓名： | 金文宇 |
| |
| 作者单位： | 中国航空工业集团公司沈阳发动机设计研究所,辽宁沈阳110015 |
| |
| 基金项目： | 辽宁省教育厅科研项目“户外轮式体育运动器材创新研究”（LT2010077） |
| |
| 摘 要： | 为满足下肢残障者和老年人的康复锻炼需要，通过对肢体运动特性分析，采用曲柄连杆机构，设计出既具有普通轮椅的代步功能、又能进行肢体康复运动锻炼的康复轮椅。采用两套传动机构，分别控制人体左右肢体的运动，以满足肢体运动的协调性。利用UG软件对康复轮椅进行三维建模和运动仿真分析，进一步对设计参数进行优化，使其结构合理、安全舒适。
|
| 关 键 词： | 康复轮椅 优化设计 仿真分析 曲柄连杆 |
Design and simulation analysis of rehabilitation wheelchair based on UG |
| |
| JIN Wen-yu. Design and simulation analysis of rehabilitation wheelchair based on UG[J]. Machinery, 2013, 0(12): 67-69 |
| |
| Authors: | JIN Wen-yu |
| |
| Affiliation: | JIN Wen-yu ( Shenyang Aeroengine Research Institute, China Aviation Industry Corp., Shenyang 110015, China ) |
| |
| Abstract: | In order to satisfy the disabled and the elderly need, through the analysis of limb movement characteristics, the crank connecting rod mechanism, design a simple structure, comfortable rehabilitation wheelchair. The rehabilitation wheelchair not only has the common wheelchair walking function, but can carry out the rehabilitation exercise of limb motor function. Using two sest of transmission mechanism, respectively, to control the body or limb movement, in order to meet the coordination of limb movement. On the rehabilitation of the wheelchair is analyzed 3D modeling and motion simulation using the UG software, the design parameters were optimized, the reasonable structure, safe and comfortable. |
| |
| Keywords: | rehabilitation wheelchair optimal design simulation analysis crank connecting rod |
| 本文献已被 维普 等数据库收录！ |
|
