| 基于Pro／E的货车侧架模具快速设计与制造研究 |
| |
| 引用本文： | 张国欣,王宏宇,李松,王广欣.基于Pro／E的货车侧架模具快速设计与制造研究[J].机械,2013(12):39-41. |
| |
| 作者姓名： | 张国欣 王宏宇 李松 王广欣 |
| |
| 作者单位： | [1]齐齐哈尔轨道交通装备有限责任公司,黑龙江齐齐哈尔161000 [2]大连交通大学机械工程学院,辽宁大连116028 |
| |
| 摘 要： | 在铁路货车的转向架结构中，侧架是重要组成部分，采用模具铸造完成。基于Pro／E设计软件平台，根据Top—Down的设计思想，采用并行设计和协同设计的方法，实现了对出口阿根廷平车侧架模具的快速设计与制造。结果表明，该方法有效地缩短了模具的开发及制造周期，也为铁路货车金型模具的快速设计制造提供了新的方法。
|
| 关 键 词： | 侧架 模具 top—down设计 并行设计 |
Rapid design and manufacturing research of truck side frame mold based on Pro/E |
| |
| ZHANG Guo-xing,WANG Hong-yu,LI Song,WANG Guang-xin.Rapid design and manufacturing research of truck side frame mold based on Pro/E[J].Machinery,2013(12):39-41. |
| |
| Authors: | ZHANG Guo-xing WANG Hong-yu LI Song WANG Guang-xin |
| |
| Affiliation: | 2 ( 1.Qiqihar Railway Rolling Stock Company, Qiqihar 161002, China; 2.School of Mechanical Engineering, Dalian Jiaotong University, Dalian 116028, China) |
| |
| Abstract: | During the structure of a bogie of the railway truck, the side frame is an important part using the method of the mold casting. Based on Pro/E software for the platform, Top-Down design ideas, using a parallel design and collaborative design method to realize rapid mold design and manufacture in Argentine flat car side frame. Results showed that this method is effective to shorten the mold development and manufacturing cycle, provide a new way for the rapid design and manufacturing of railway wagons metal mold. |
| |
| Keywords: | side frame mold top-down design parallel design |
| 本文献已被 维普 等数据库收录！ |
|
