首页 | 本学科首页   官方微博 | 高级检索  
     

气液交替注入参数的选择
引用本文:张茂林,梅海燕,顾鸿军,董汉平,李新科.气液交替注入参数的选择[J].特种油气藏,2006,13(2):87-89.
作者姓名:张茂林  梅海燕  顾鸿军  董汉平  李新科
作者单位:1. 西南石油大学,四川,成都,610500
2. 中油新疆油田公司,新疆,克拉玛依,834000
基金项目:国家科技攻关项目;国家重点实验室基金
摘    要:采用气液交替注入技术可以提高高含水油藏的波及效率,改善油层的动用程度,达到提高原油采收率的目的。针对氮气/起泡剂溶液交替注入方式,分别在静态和动态条件下评价了起泡剂的使用浓度、注入速度、气液比、注入方式、岩心渗透率等参数对泡沫封堵性能的影响。综合评价结果表明,气液交替注入方式好于气液同时注入方式,能够在岩心中形成性能稳定的泡沫,对岩心的封堵作用较强。

关 键 词:气水交替注入方式  起泡剂  阻力因子  泡沫性能  注入参数
文章编号:1006-6535(2006)02-0087-03
收稿时间:2005-07-26
修稿时间:2005-12-20

Selection of injection parameters for alternative injection of gas and solution
ZHANG Mao-lin,MEI Hai-yan,GU Hong-jun,DONG Han-ping,LI Xin-ke.Selection of injection parameters for alternative injection of gas and solution[J].Special Oil & Gas Reservoirs,2006,13(2):87-89.
Authors:ZHANG Mao-lin  MEI Hai-yan  GU Hong-jun  DONG Han-ping  LI Xin-ke
Abstract:For the reservoir with high water cut,alternative injection of gas and solution can improve sweep efficiency,increase producing reserves and recovery factor.The influence of the concentration of foaming agent solution,injection rate,the ratio of gas and solution,injection mode,and core permeability on foam blockage behavior in core has been studied under static and dynamic condition.Comprehensive evaluation shows that the injection of solution alternating gas is better than the injection of solution mixing with gas.It can form stable foams in core and has better blockage effect.
Keywords:alternative injection of gas and solution  foaming agent  resistance factor  foam behavior  injection parameter
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号