| 泡沫铝合金球形件的二次发泡法制备成型 |
| |
| 引用本文： | 褚旭明,王辉,何思渊,何德坪.泡沫铝合金球形件的二次发泡法制备成型[J].哈尔滨工程大学学报,2008,29(4):420-424. |
| |
| 作者姓名： | 褚旭明 王辉 何思渊 何德坪 |
| |
| 作者单位： | 东南大学,材料科学与工程学院,江苏,南京,210096 |
| |
| 基金项目： | 国家自然科学基金
,
国家重点基础研究发展计划(973计划) |
| |
| 摘 要： | 采用二次发泡新方法制备具有致密表层的泡沫铝合金球形件,通过微型CT层析摄像仪对制备获得的泡沫铝合金球形件的孔结构形态进行观察和分析.研究了二次泡沫化温度和时间等参数对球形件孔结构(孔径,孔隙率)的影响,分析了球形件充型过程中的作用机理.结果表明,TiH2的二次分解是泡沫铝球形件充型驱动力,采用合适温度和时间通过二次泡沫化方法可制备孔结构均匀、具有致密表层外皮的泡沫铝合金球形件,孔隙率范围可在50.4%~93.8%变化,充型过程是固-液-气三相的共同作用.
|
| 关 键 词： | 闭孔泡沫铝 二次泡沫化 泡沫铝合金球形件 |
| 文章编号： | 1006-7043(2008)04-0420-05 |
| 修稿时间： | 2007年9月1日 |
Production of foamed aluminum alloy spherical parts using a secondary foam method |
| |
| CHU Xu-ming,WANG Hui,HE Si-yuan,HE De-ping.Production of foamed aluminum alloy spherical parts using a secondary foam method[J].Journal of Harbin Engineering University,2008,29(4):420-424. |
| |
| Authors: | CHU Xu-ming WANG Hui HE Si-yuan HE De-ping |
| |
| Abstract: | Foamed aluminum alloy spherical parts with dense skins were fabricated with a secondary-foaming method.Their pore structure was scanned and analyzed with XCT.The effects of foam temperature and time on pore structure(diameter,porosity) were experimentally investigated.The mechanics of the molding process were then analyzed.The results showed that filling ability is dominated by redecomposition of TiH2.With appropriate temperatures and times,the secondary-foaming method can produce foamed Al alloy spherical parts with dense skins and between 50.4%~93.8% of porosity.The molding process is the joint action of solid-liquid-gas phases. |
| |
| Keywords: | cellular Al alloy foam secondary foaming foamed Al alloy spherical parts |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
