| 1Cr18Ni9钢板坯室温喷丸过程的三维有限元模拟 |
| |
| 引用本文： | 任涛林,吴渺渺.1Cr18Ni9钢板坯室温喷丸过程的三维有限元模拟[J].机械工程师,2013(11):110-111. |
| |
| 作者姓名： | 任涛林 吴渺渺 |
| |
| 作者单位： | [1]哈尔滨电机厂有限责任公司哈尔滨大电机研究所,哈尔滨150040 [2]黑龙江出入境检验检疫局,哈尔滨150001 |
| |
| 摘 要： | 利用有限元模拟软件ABAQUS-6.7对奥氏体不锈钢1Cr18Ni9板坯的表面喷丸过程进行了三维有限元模拟,结果表明塑性变形集中在坯料表层,最大的等效应变出现在次表层.
|
| 关 键 词： | 喷丸 奥氏体不锈钢 表面变形 |
3D FEM Simulation of Steel 1Cr18Ni9 in Shot Peening at Room Temperature |
| |
| REN Tao-lin,WU Miao-miao.3D FEM Simulation of Steel 1Cr18Ni9 in Shot Peening at Room Temperature[J].Mechanical Engineer,2013(11):110-111. |
| |
| Authors: | REN Tao-lin WU Miao-miao |
| |
| Affiliation: | 1.Harbin Institute of Large Electrical Machinery, Harbin 150040. Chinal; 2.Heilongjiang Entry-Exit lnspection and Quarantine Bureau. Harbin 150001, China ) |
| |
| Abstract: | The shot peening of austenitic stainless steel 1Cr18Ni9 billet is simulated with 3D FEM software ABAQUS-6.7, which indicates that plastie deformation is localized within the surface of billet and the maximum equivalent plastic deformation appears on the subsurface. |
| |
| Keywords: | shot peening austenitic stainless steel surface deformation |
| 本文献已被 维普 等数据库收录！ |
