| 数控车削凹槽及其倒角的方法 |
| |
| 引用本文： | 杜军,张瑞平. 数控车削凹槽及其倒角的方法[J]. 机械工程师, 2013, 0(11): 104-105 |
| |
| 作者姓名： | 杜军 张瑞平 |
| |
| 作者单位： | [1]武汉软件工程职业学院机械制造工程系,武汉430205 [2]武汉市工程咨询部项目咨询处,武汉430014 |
| |
| 摘 要： | 结合加工实例,针对轴类零件在数控车削沟槽倒角中出现的尺寸及位置误差问题进行了原因分析,阐述了保证零件加工精度的工艺、编程要点及注意事项.
|
| 关 键 词： | 倒角 刀位点 轨迹 |
NC Turning Method of Groove and Lead Angle |
| |
| DU Jun,ZHANG Rui-ping. NC Turning Method of Groove and Lead Angle[J]. Mechanical Engineer, 2013, 0(11): 104-105 |
| |
| Authors: | DU Jun ZHANG Rui-ping |
| |
| Affiliation: | 1.Department of Mechanical, Wuhan Vocational College of Software and Engineering, Wuhan 430205, China; 2.Wuhan Engineering Advisory Board ,Wuhan 430014, China) |
| |
| Abstract: | Taking the processing of shaft parts as example, size and position errors of NC turning groove and lead angle are analyzed. Machining and programming technology that can ensure the workpiece precision are introduced. |
| |
| Keywords: | lead angle cutter location point track |
| 本文献已被 维普 等数据库收录！ |
|
