| 恒流模式直流流强检测系统的优化 |
| |
| 引用本文： | 熊云,阎映炳,冷用斌,易星,赖龙伟,王宝鹏,张宁,陈之初. 恒流模式直流流强检测系统的优化[J]. 核技术, 2012, 0(2): 81-86 |
| |
| 作者姓名： | 熊云 阎映炳 冷用斌 易星 赖龙伟 王宝鹏 张宁 陈之初 |
| |
| 作者单位： | 中国科学院上海应用物理研究所;中国科学院研究生院 |
| |
| 基金项目： | 国家自然科学基金(11075198)资助 |
| |
| 摘 要： | 介绍了上海光源恒流模式下直流流强检测系统的软硬件结构。Matlab仿真比对两种束流流强算法性能,结果表明,使用整数周期算术平均算法时,2 Hz系统带宽下系统直流流强测量分辨率可望好于0.38μA。由于Top-up模式束流的特性,对束流寿命算法进行优化,进行两点曲线拟合。介绍了Top-up模式下直流流强检测系统的置信度算法,并用实测数据进行了验证,数据预测准确,收敛速度快,性能较好。对DCCT系统的软件实现给出了软件流程图,指导软件代码的实现。
|
| 关 键 词： | 束流流强 束流寿命 数据预测算法 直流流强检测系统 恒流模式 上海光源 |
Optimization of DCCT system on top-up operation mode |
| |
| Affiliation: | XIONG Yun1,2 YAN Yingbing1 LENG Yongbin1 YI Xing1,2 LAI Longwei1,2 WANGBaopeng1,2 ZHANG Ning1,2 1(Shanghai Synchrotron Radiation Facility,Shanghai Institute of Applied Physics,Shanghai 201800,China) 2(Graduate University of Chinese Academy Science,Beijing 100049,China) |
| |
| Abstract: | In this paper,we report our work on the software and hardware architecture of the DCCT system for SSRF where top-up mode is being used.Matlab is used to simulate two methods of beam current calculation.The system resolution of the DC current measurement with 2 Hz system bandwidth could be better than 0.38 μA when arithmetic mean of whole cycle algorithm is applied.The beam lifetime calculation algorithm is optimized to use two points in the curve fitting procedure based on the characters of the top-up mode.The algorithm of finding the confidence level is also discussed and is verified to be accurate in data prediction as well as fast in convergence by using the practical data fetched in the laboratory.The flow chart of the software layer is given to show how the code is implemented. |
| |
| Keywords: | Beam current Beam lifetime Data prediction algorithm DCCT system Top-up SSRF |
| 本文献已被 CNKI 等数据库收录！ |
|
