| 不同温度下TA15钛合金梁锤锻成形有限元分析 |
| |
| 引用本文： | 夏玉峰,佟莹,田飞,权国政.不同温度下TA15钛合金梁锤锻成形有限元分析[J].热加工工艺,2010,39(7). |
| |
| 作者姓名： | 夏玉峰 佟莹 田飞 权国政 |
| |
| 作者单位： | 1. 重庆大学材料科学与工程学院,重庆,400044
2. 重庆电子工程职业技术学院,重庆,401331 |
| |
| 摘 要： | 以TA15钛合金梁的锤锻成形工艺为例,利用Deform有限元模拟软件,研究了850、900、950℃三种初始温度下零件锤锻成形所需要的锤击次数、每次锤击的行程及最大损伤因子的变化情况。通过有限元模拟分析,得到锻造次数依次为7、5、4次,最大损伤因子区域位于梁右端顶部圆角处,其值在打靠阶段开始即行程为86mm时达到最大。通过比较,最终选择950℃为成形方案。这为梁的实际生产和钛合金锻造成形性的进一步研究提供了一定的理论基础。
|
| 关 键 词： | TA15钛合金 锤锻成形 锻造次数 损伤因子 |
Finite Element Analysis of Hammer Forging Process for TA15 Titanium Alloy Girder Under Different Temperatures |
| |
| XIA Yufeng,TONG Ying,TIAN Fei,QUAN Guozheng.Finite Element Analysis of Hammer Forging Process for TA15 Titanium Alloy Girder Under Different Temperatures[J].Hot Working Technology,2010,39(7). |
| |
| Authors: | XIA Yufeng TONG Ying TIAN Fei QUAN Guozheng |
| |
| Affiliation: | XIA Yufeng1,TONG Ying2,TIAN Fei1,QUAN Guozheng1(1.School of Material Science , Engineering,Chongqing University,Chongqing 400044,China,2.College of Electronic Engineering,Chongqing 401331,China) |
| |
| Abstract: | The hammer forging forming process for TA15 titanium alloy girder was taken as an example, when the girder were formed at different original temperature of 850℃,900℃and 950"C,the needed hammering times,each hammer's stroke and varieties of damage factors were researched respectively based on Deform software.By simulation allalysis,the needed hammering times is 7,5 and 4 in order,and the biggest damage factor locates at the fight top fillet of the girder,which reachs the highest point at about 86 mm stroke.Through comparison,the original ternperaturc 950℃ is the best scheme.The results are significant theoretical foundation for the practical production and forming study of TA15 titanium alloy. |
| |
| Keywords: | TA15 titanium alloy hammer forging hammering times damage factors |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
