Detection of tool deflection in milling by a sensory axis slide for machine tools |
| |
| Affiliation: | 1. Professorship for Adaptronics and Lightweight Design in Production, Technische Universität Chemnitz, 09107 Chemnitz, Germany;2. Professorship Micromanufacturing Technology, Technische Universität Chemnitz, 09107 Chemnitz, Germany;3. Fraunhofer Institute for Machine Tools and Forming Technology IWU, Reichenhainer Str. 88, 09126 Chemnitz, Germany;1. FSTC-RUES, University of Luxembourg, Luxembourg, 6, rue Richard Coudenhove-Kalergi, Luxembourg L-1359, Luxembourg;2. Department of Mechanical Engineering, CECOS University of IT and Emerging Sciences, Peshawar, Pakistan;1. Manufacturing System Integration, Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia;2. Department of Engineering Design and Manufacture, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia |
| |
| Abstract: | Previous publications regarding the project Gentelligent Components for Machine Tools of the Collaborative Research Center 653 presented the design of a new sensory z-slide for a 5-axis machining center. Equipped with several strain sensors, the new slide is able to feel the machining process by measuring the process forces and vibrations. Here, a challenge is the detection of mechanical strains in the slide without degrading its high global stiffness. The application of micro strain gages in small notches on the slide represents a promising approach for the improvement of the sensitivity as well as the integration of sensors into the slide. This paper presents the utilization of the sensing axis-slide in a manufacturing environment. For this purpose, a first prototype of the slide is build and integrated into a milling center DMG HSC 55 linear. In this test machine, the dynamic characteristics of the integrated slide are identified with frequency response function measurements. Based on force measurements with a dynamometer, force calibration matrices are computed to calculate the forces in the machine coordinate system at the tool center point from the measured strain signals during milling processes. The force sensing with the slide allows furthermore the identification of tool characteristics such as the static tool stiffness. This parameter is estimated from the ratio of the measured contact forces and the set collision distance when moving the tool smoothly into the work piece. The known tool stiffness enables the detection of the static tool deflection from the force signals during a milling process. To compare the detected tool deflection with the real tool deflection, reference measurements on the work piece are performed using a perthometer. For further monitoring applications of the tool deflection in more complex 2.5D milling an approach to transform the measured forces from the stationary machine coordinate system into the moving tool coordinate system is presented. |
| |
| Keywords: | Sensory axis slide Process monitoring Tool deflection |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
