| 邢钢180 m2烧结机提高混合料温度的实践 |
| |
| 引用本文： | 李彦格,孙汉勇. 邢钢180 m2烧结机提高混合料温度的实践[J]. 烧结球团, 2006, 31(3): 49-52 |
| |
| 作者姓名： | 李彦格 孙汉勇 |
| |
| 作者单位： | 054027,河北,邢台钢铁有限责任公司技术中心;邢台钢铁有限责任公司 |
| |
| 摘 要： | 介绍了邢钢180 m^2烧结机投产以来,在提高混合料温度方面所采取的主要措施.该厂通过提高生石灰质量、采用蒸汽预热混合料、在混合机中加热红泥浆等,改善了混合料的透气性,进而提高了烧结矿产、质量.
|
| 关 键 词： | 混合料温度 烧结生产 生石灰 |
| 收稿时间： | 2006-04-28 |
| 修稿时间： | 2006-04-28 |
PRACTICE OF INCREASING MIXTURE TEMPERATURE IN XINGGANG 180M2 SINTERING PLANT |
| |
| Li Yange. PRACTICE OF INCREASING MIXTURE TEMPERATURE IN XINGGANG 180M2 SINTERING PLANT[J]. Sintering and Pelletizing, 2006, 31(3): 49-52 |
| |
| Authors: | Li Yange |
| |
| Affiliation: | Li Yange et al. |
| |
| Abstract: | Since 180 m^2 sintering plant commissioning, a series of measures to increase the mixture temperature were adopted such as improvement of burnt lime quality, pre- heating of sintering mixture and addition of hot red slurry etc. As a result, the bed permeability was increased, the sinter output was also increased, the sinter quality was improved. |
| |
| Keywords: | mixture temperature sintering production burnt lime |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
