| 托盘叠层热流道注射模设计 |
| |
| 引用本文： | 李先珍,田福祥,姜虎森. 托盘叠层热流道注射模设计[J]. 模具制造, 2009, 9(4): 49-51 |
| |
| 作者姓名： | 李先珍 田福祥 姜虎森 |
| |
| 作者单位： | 青岛理工大学,山东青岛,266033 |
| |
| 摘 要： | 介绍了托盘注射模实用结构，论述了模具结构特点和工作过程。该模具采用叠层型腔结构，1模两腔，热流道浇注系统，同步分型，用于角式注塑机。模具结构紧凑、工作可靠，可实现全自动生产。
|
| 关 键 词： | 叠层成型 热流道 同步分型 注射模 内加热 |
Design of Stack Injection Mold with Hot Runner for the Tray |
| |
| Abstract: | A practical structure was introduced on the injection mold for tray,and stated the structure characteristics and the operational principle.Stack mold,hot runner and 2-cavity,synchronous parting were adopted on the mold.It was used in angle-injection machine.The mold is compact in structure,reliable in operation and it also can automatic completely. |
| |
| Keywords: | stack mold hot runner synchronous parting injection mold inner heating |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
