首页 | 本学科首页   官方微博 | 高级检索  
     

双稳定矩形非对称复合材料层板的跳变研究
引用本文:李昊,戴福洪,杜善义. 双稳定矩形非对称复合材料层板的跳变研究[J]. 复合材料学报, 2011, 28(4): 196-201
作者姓名:李昊  戴福洪  杜善义
作者单位:哈尔滨工业大学 复合材料与结构研究所, 哈尔滨 150001
基金项目:国家自然科学基金(10872058); 国家重点基础研究项目(2010CB631100)
摘    要:对双稳定矩形非对称复合材料层合板两种稳定构型的跳变行为进行了实验和数值研究。通过实验测得中心加载下层合板两种稳定构型跳变的临界载荷, 建立了两种稳定构型的非线性有限元分析模型, 成功预报了层合板固化后的两种稳定构型, 并进一步预报了两种稳定构型的跳变临界载荷, 预报结果与实验结果吻合良好。实验和有限元模拟结果表明, 中心加载下矩形非对称层合板两种构型的临界载荷相差较大, 并且跳变的过程有所差异。 

关 键 词:双稳定   矩形   复合材料层板   跳变   临界载荷
收稿时间:2010-08-03

Snap-through of bi-stable rectangular unsymmetric cross-ply composite laminates
LI Hao,DAI Fuhong,DU Shanyi. Snap-through of bi-stable rectangular unsymmetric cross-ply composite laminates[J]. Acta Materiae Compositae Sinica, 2011, 28(4): 196-201
Authors:LI Hao  DAI Fuhong  DU Shanyi
Affiliation:Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin 150001, China
Abstract:The snap-through of two stable configurations of rectangular unsymmetric cross-ply composite laminate were investigated through experimental and numerical ways.The critical loads of snap-through of the two stable configurations were measured in experiments,and a non-linear finite element model of bi-stable rectangular unsymmetric cross-ply composite laminate was built.The finite element model successfully predicts the two stable configurations and further predicts their critical loads of snap-through.It sho...
Keywords:bi-stable  rectangular  composite laminates  snap-through  critical load  
本文献已被 CNKI 等数据库收录!
点击此处可从《复合材料学报》浏览原始摘要信息
点击此处可从《复合材料学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号