| 基于数值模拟的热梯度CVI制备C/C 复合材料致密化行为 |
| |
| 引用本文： | 边国军,齐乐华,宋永善,张卫红,李贺军.基于数值模拟的热梯度CVI制备C/C 复合材料致密化行为[J].复合材料学报,2011,28(4):29-33. |
| |
| 作者姓名： | 边国军 齐乐华 宋永善 张卫红 李贺军 |
| |
| 作者单位： | 1.西北工业大学 机电学院, 西安 710072; |
| |
| 基金项目： | 国家自然科学基金(50972121);国家自然基金重点项目(50832004) |
| |
| 摘 要： | 根据热梯度化学气相渗透(CVI)工艺制备C/C复合材料的特点, 建立了均相与非均相反应的多场耦合数学模型。以2D炭毡为预制体, 天然气为前驱体, 炉压为100 kPa的工艺条件下, 通过计算获得了预制体致密化过程中密度的演变规律; 分析了沉积温度及气体流量对致密化的影响, 获得了合理的沉积温度和气体流量范围。致密化100 h后, 预制体整体密度的计算值与实验值基本一致, 径向密度分布的模拟值与实验值呈相同的变化规律, 验证了模型的可靠性和模拟的预测能力。
|
| 关 键 词： | C/C复合材料 热梯度CVI 致密化 数值模拟 多场耦合 |
| 收稿时间： | 2010-07-31 |
Densification process for thermal gradient CVI fabricating C/C composites based on numerical simulation |
| |
| BIAN Guojun,QI Lehua,SONG Yongshan,ZHANG Weihong,LI Hejun.Densification process for thermal gradient CVI fabricating C/C composites based on numerical simulation[J].Acta Materiae Compositae Sinica,2011,28(4):29-33. |
| |
| Authors: | BIAN Guojun QI Lehua SONG Yongshan ZHANG Weihong LI Hejun |
| |
| Affiliation: | 1.School of Mechanical Engineering, Northwestern Polytechnical University, Xi’an 710072, China;2.School of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an 710072, China |
| |
| Abstract: | A homogeneous and heterogeneous reaction mathematical model of multi-field coupling was developed according to the characteristics of thermal gradient chemical vapor infiltration(CVI) fabricating C/C composites,using 2D carbon felt as the preform,natural gas as the carbon source gas,the furnace pressure of 100kPa.The time evolution of the preform density was obtained by calculation,the effects of deposition temperatures and gas flow rates on the densification process were analyzed,and the reasonable range o... |
| |
| Keywords: | C/C composites thermal gradient CVI densification numerical simulation multi-physical field coupling |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《复合材料学报》浏览原始摘要信息 |
|
点击此处可从《复合材料学报》下载全文 |
|
