| 蓄能器在全液压注塑机的应用以及节能效果研究 |
| |
| 引用本文： | 杨智韬,魏保华,瞿金平.蓄能器在全液压注塑机的应用以及节能效果研究[J].四川大学学报(工程科学版),2010,42(1):243-248. |
| |
| 作者姓名： | 杨智韬 魏保华 瞿金平 |
| |
| 作者单位： | 华南理工大学聚合物新型成型装备国家工程研究中心,聚合物成型加工工程教育部重点实验室,广东广州510640 |
| |
| 基金项目： | 国家自然科学基金资助项目(10872071) |
| |
| 摘 要： | 为了节约传统液压注塑机液压阀溢流损耗能量,对传统的全液压注塑机的油路进行改造,加入自行研制的蓄能器节能模块;对改造完成的节能注塑机进行能耗测试并与未改造的传统注塑机进行能耗比较,发现蓄能器模块加入液压注塑机后的整机能耗有明显降低,能实现预期的节能降耗目的;在不同的塑化注射压力下、不同的塑化背压下、不同保压时间下,对节约能耗数据进行测量分析,并从机理上分析能耗数据的差异,研究蓄能器模块使液压注塑机能耗降低的原因.
|
| 关 键 词： | 蓄能器 节能 能耗 液压注塑机 |
| 收稿时间： | 2008/12/8 0:00:00 |
| 修稿时间： | 2009/4/21 0:00:00 |
Application of Accumulator to Entire Hydraulic Injection Molding Machine and Its Energy-saving Effect Analysis |
| |
| Yang Zhitao,Wei Baohua and Qu Jinping.Application of Accumulator to Entire Hydraulic Injection Molding Machine and Its Energy-saving Effect Analysis[J].Journal of Sichuan University (Engineering Science Edition),2010,42(1):243-248. |
| |
| Authors: | Yang Zhitao Wei Baohua and Qu Jinping |
| |
| Affiliation: | YANG Zhi-tao,WEI Bao-hua,QU Jin-ping(The National Eng.Research Center of Novel Equipment for Polymer Processing,The Key Lab.of Polymer Processing Eng.of Ministry of Edu.,South China Univ.of Technol.,Guangzhou 510640,China) |
| |
| Abstract: | In order to overcome the disadvantage of overflow energy loss in conventional injection molding machine,an accumulator module installed in hydraulic injection molding machine was self-designed to save the work energy of the machine.The energy consumption data of injection molding machine with accumulator module and without accumulator module were measured and compared throughmany tests.It was found that the energy consumption of injection molding machine with accumulator module is decreased significantly.Th... |
| |
| Keywords: | accumulator energy saving energy consumption hydraulic injection molding machine |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《四川大学学报(工程科学版)》浏览原始摘要信息 |
|
点击此处可从《四川大学学报(工程科学版)》下载全文 |
