Pressure control of an electro-hydraulic actuated clutch via novel hysteresis model |
| |
Affiliation: | 1. TU Wien, Institute of Mechanics and Mechatronics, Division of Control and Process Automation, Vienna, Austria;2. Karlsruhe Institute of Technology, Institute of Engineering Mechanics, Chair for Dynamics/Mechatronics, Karlsruhe, Germany;3. AVL List GmbH, Division for Powertrain Engineering, Graz, Austria;4. TU Wien, Christian Doppler Laboratory for Innovative Control and Monitoring of Automotive Powertrain Systems, Vienna, Austria |
| |
Abstract: | This paper mainly focuses on the development of pressure tracking control logic of electro-hydraulic actuators for vehicle application. This is done to improve and ensure the performance of a precise lower-level controller for evolving modern shift control logic. The required performance is obtained by hysteresis model-based feed-forward control and additional feedback control. The hysteresis and the time delay, which adversely affect pressure control, are well known nonlinear behaviors in electro-hydraulic actuators. In order to cope with the hysteresis, a novel hysteresis model is proposed based on a physical phenomenon. A mathematical model based on a characteristic curve obtained in preliminary experiments is presented using only one tuning parameter, and this model can be inverted easily to construct a feed-forward controller. In addition, a feedback controller is designed considering the stability margin of a time delay system. The feedback control inputs ensure compensation of the feed-forward errors caused by model error and uncertainty. The proposed controller is designed to lower computational cost considering applicability for production vehicles. As a result, the developed pressure controller is applied to a transmission control unit of a production vehicle and verified experimentally for various driving scenarios. |
| |
Keywords: | Hysteresis Electro-hydraulic actuator Pressure control Wet clutch control |
本文献已被 ScienceDirect 等数据库收录! |
|