The behavior of an elastic-perfectly plastic sinusoidal surface under contact loading

The goal of this paper is to provide the foundation for an analysis of contact between elastic-plastic solids, whose surface roughness is idealized with a Weierstrass profile. To this end, we conduct a parametric study of the plastic deformation and residual stress developed by the two-dimensional contact between a flat, rigid platen and an elastic-perfectly plastic solid with a sinusoidal surface. Our analysis shows that the general characteristics of the deformation can be characterized approximately by two parameters: α = a/λ, where a is the half-width of the contact and λ is the period of the surface waviness; ψ = E^*g/σ_Yλ, where E^* and σ_Y are the effective modulus and yield stress of the substrate, respectively, and g is the amplitude of the surface roughness. Depending on the values of these parameters, we identify eight general types of behavior for the asperity contacts: (a) elastic, elastic-plastic or fully plastic isolated Hertz type contacts; (b) elastic, or elastic-plastic non-Hertzian isolated contacts; and (c) elastic, elastic-plastic or fully plastic, interacting contacts. Relationships between contact pressure, contact size, effective indentation depth and residual stress are explored in detail in each regime of behavior. Implications on rough surface contacts are discussed.