首页 | 本学科首页   官方微博 | 高级检索  
     

超声清洗设备功率自动监控电路的设计
引用本文:徐亮,阴亚芳.超声清洗设备功率自动监控电路的设计[J].西安邮电学院学报,2010,15(5):62-65.
作者姓名:徐亮  阴亚芳
作者单位:[1]西安邮电学院通信与信息工程学院,陕西西安710121 [2]西安邮电学院电子工程学院,陕西西安710121
摘    要:为使超声清洗设备射频输出功率最大,要求超声换能器始终工作在谐振状态下。采用频率自动跟踪技术,并引入数字锁相环具体实现系统频率自动跟踪。仿真结果表明,所设计的超声清洗电路直流到射频输出功率转换效率较高;超声换能器上的电压、电流信号相位同步,换能器始终工作在谐振状态下。

关 键 词:超声波发生器  超声换能器  全桥式逆变器  锁相环

The design of an automatic control circuit for ultrasonic cleaning equipments
XU Liang,YIN Ya-fang.The design of an automatic control circuit for ultrasonic cleaning equipments[J].Journal of Xi'an Institute of Posts and Telecommunications,2010,15(5):62-65.
Authors:XU Liang  YIN Ya-fang
Affiliation:1.School of Communication and Information Engineering,Xi'an University of Posts and Telecommunications,Xi'an 710121,China;2.School of Electronic Engineering,Xi'an University of Posts and Telecommunications,Xi'an 710121,China)
Abstract:In order to reach the maximum radio frequency output power of the ultrasonic cleaning equipment,it is essential for ultrasonic transducer to work at the resonant state all the time.To ensure that the transducer is always at the resonance state,the frequency automatic tracking technology was adopted,and a digital phase lock loop was used.The simulation results show that,the total DCto-RF power conversion efficiency that the system provides is very high;the phase of voltage and current on this ultrasonic transducer are precisely synchronized,hence the ultrasonic cleaning equipment keeps working under the resonance state all the time.
Keywords:ultrasonic generator  ultrasonic transducer  full-bridge inverter  Phase Lock Loop
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号