| 基于ANSYS的薄壁筒件多刀切削加工变形分析 |
| |
| 引用本文： | 吴剑峰,罗红波. 基于ANSYS的薄壁筒件多刀切削加工变形分析[J]. 工具技术, 2005, 39(12): 37-38 |
| |
| 作者姓名： | 吴剑峰 罗红波 |
| |
| 作者单位： | 四川大学 |
| |
| 摘 要： | 应用有限元软件ANSYS对薄壁筒件多刀切削加工进行了变形分析,并从提高工艺刚度的角度出发,提出了相应的工艺措施。
|
| 关 键 词： | ANSYS 薄壁筒件 多刀切削 |
| 修稿时间： | 2005-04-01 |
Deformation Analysis of Thin Wall Tube Based on ANSYS in Multitool Machining |
| |
| Wu Jianfeng,Luo Hongbo. Deformation Analysis of Thin Wall Tube Based on ANSYS in Multitool Machining[J]. Tool Engineering(The Magazine for Cutting & Measuring Engineering), 2005, 39(12): 37-38 |
| |
| Authors: | Wu Jianfeng Luo Hongbo |
| |
| Abstract: | The Deformation of thin wall tube in the process of multitool machining is analyzed by using ANSYS software. From the point of improving process rigidity,the corresponding technology measure is brought forward. |
| |
| Keywords: | ANSYS thin wall tube multitool machining |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
