| 多向锻造对变形镁合金AZ31组织和力学性能的影响 |
| |
| 引用本文： | 任政,张兴国,庞磊,张涛,齐国红,金俊泽. 多向锻造对变形镁合金AZ31组织和力学性能的影响[J]. 塑性工程学报, 2009, 16(6). DOI: 10.3969/j.issn.1007-2012.2009.06.005 |
| |
| 作者姓名： | 任政 张兴国 庞磊 张涛 齐国红 金俊泽 |
| |
| 作者单位： | 大连理工大学,材料科学与工程学院,三束材料改性国家重点实验室,大连,116024 |
| |
| 基金项目： | 国家自然科学基金资助项目，重点基金资助项目，教育部重点资助项目 |
| |
| 摘 要： | 文章采用不同锻造工艺对电磁连铸变形镁合金AZ31铸锭进行了多向锻造研究。结果表明,通过大变形的多向锻造后,变形镁合金AZ31可以得到有效细化,多向锻造有利于变形镁合金发生再结晶,锻造后变形镁合金AZ31最终得到均匀细小的等轴晶组织。工艺3得到最好的综合性能,锻造后变形镁合金AZ31硬度和抗拉强度分别提高了22.5%和33.5%,延伸率也有所提高。多向锻造后,室温拉伸试样的断口形貌出现大量的韧窝,表现为剪切断裂为主的韧性断裂。
|
| 关 键 词： | AZ31镁合金 多向锻造 电磁连铸 再结晶 |
Effect of multiple forging process on microstructure and mechanical properties of wrought magnesium alloy AZ31 |
| |
| REN Zheng,ZHANG Xing-guo,PANG Lei,ZHANG Tao,QI Guo-hong,JIN Jun-ze. Effect of multiple forging process on microstructure and mechanical properties of wrought magnesium alloy AZ31[J]. Journal of Plasticity Engineering, 2009, 16(6). DOI: 10.3969/j.issn.1007-2012.2009.06.005 |
| |
| Authors: | REN Zheng ZHANG Xing-guo PANG Lei ZHANG Tao QI Guo-hong JIN Jun-ze |
| |
| Abstract: | The wrought magnesium alloy AZ31 produced by electromagnetic continuous casting (EMC) were forged under different multiple forging processes.The magnesium alloy AZ31 with fine homogeneous microstructure was obtained by multiple forging with large deformation.It was found that the multiple forging is propitious to the recrystallization of wrought magnesium alloy AZ31.The hardness and UTS of wrought magnesium alloy AZ31 adopting 3# multiple forging process increased by 22.5% and 33.5% respectively while the elongation improved just a little in comparing with as-cast AZ31 alloy.A mass of dimple was observed on the fractographs of the as-forged sample,and the tensile-fracture presented on the fracture surface was mainly characterized in shearing fracture. |
| |
| Keywords: | AZ31 multiple forging EMC recrystallization |
| 本文献已被 万方数据 等数据库收录！ |
|
