Adsorption behaviors of mercury from aqueous solution using sulfur-impregnated adsorbent developed from coal

Adsorption of mercury from aqueous solution on sulfur-impregnated adsorbent has been studied. Raw coal was mixed with K₂S powder, and then heated at 800-1000 °C for 30 min in nitrogen to produce sulfur-impregnated adsorbent. The sulfur content and specific surface area of the adsorbent were determined, and the ability of the adsorbent to adsorb mercury in aqueous solution was examined. With increasing temperature of sulfur-impregnation, specific surface area of the adsorbent increases, while sulfur content of the adsorbent is almost constant. The adsorbent obtained at 900 °C shows the highest and fastest adsorption of mercury from aqueous solution at 25 °C, and the elution extents of adsorbed mercury are negligible in distilled water and 10% in 0.1 M HCl solution, respectively. Adsorption kinetics was tested for pseudo-first order and pseudo-second order reactions, and the rate constants of adsorption for these kinetic models were calculated. Adsorption experiments demonstrate that the adsorption process corresponds to pseudo-second-order kinetic model than pseudo-first-order model. With increasing temperature of aqueous solution, the kinetics of adsorption becomes faster and the amount of mercury adsorbed on the adsorbent increases. The thermodynamic values, ΔG⁰, ΔH⁰ and ΔS⁰, indicated that adsorption was an endothermic and spontaneous process.