| 轧辊孔型数控车削加工的三维动态仿真 |
| |
| 引用本文： | 姜繁智,李立新,郭爱华,谢剑钢. 轧辊孔型数控车削加工的三维动态仿真[J]. 现代制造工程, 2006, 0(11): 37-39 |
| |
| 作者姓名： | 姜繁智 李立新 郭爱华 谢剑钢 |
| |
| 作者单位： | 武汉科技大学机械自动化学院,武汉,430081;武汉科技大学材料与冶金学院,武汉,430081;中冶南方工程技术有限公司,武汉,430081 |
| |
| 摘 要： | 通过分析数控系统和数控代码的特点建立基于代码的加工仿真接口,提出代码翻译的基本思路。以Inventor三维建模和显示环境为支承平台,在合理简化的基础上采用布尔运算和动态刷新显示的方法,实现了轧辊孔型车削加工过程的三维动态仿真。
|
| 关 键 词： | 轧辊孔型 数控 车削 动态仿真 Inventor |
| 文章编号： | 1671-3133(2006)11-0037-03 |
| 修稿时间： | 2006-05-11 |
3D dynamic simulation for NC turning process of roller passes |
| |
| Jiang Fanzhi,Li Lixin,Guo Aihua,Xie Jiangang. 3D dynamic simulation for NC turning process of roller passes[J]. Modern Manufacturing Engineering, 2006, 0(11): 37-39 |
| |
| Authors: | Jiang Fanzhi Li Lixin Guo Aihua Xie Jiangang |
| |
| Abstract: | An interface based on NC codes for processing simulation is built by analyzing numerical system and NC codes,a general idea of code translation is developed.Grounded on the supporting platform of Inventor 3D modeling and display condition,3D real-time simulation of roller passes turning processing is realized by rational simplified adoption of Boolean operation and dynamic refurbishing display. |
| |
| Keywords: | Inventor |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
