| 电沉积制备Ni-Co-Al_2O_3纳米复合镀层的研究 |
| |
| 引用本文： | 王一雍,苏建铭,韩楚菲,金辉,张峻巍,宋华,李继东.电沉积制备Ni-Co-Al_2O_3纳米复合镀层的研究[J].有色金属(冶炼部分),2015(2):53-57. |
| |
| 作者姓名： | 王一雍 苏建铭 韩楚菲 金辉 张峻巍 宋华 李继东 |
| |
| 作者单位： | 辽宁科技大学激光先进制造技术研发中心,辽宁科技大学激光先进制造技术研发中心,辽宁科技大学激光先进制造技术研发中心,辽宁科技大学激光先进制造技术研发中心,辽宁科技大学激光先进制造技术研发中心,辽宁科技大学,辽宁科技大学 |
| |
| 基金项目： | 鞍山市百千万科技创新工程项目(2012S05)；鞍山市科技计划项目（2012S08） |
| |
| 摘 要： | 采用电沉积工艺制备了Ni-Co-Al2O3纳米复合镀层,利用显微硬度仪测定了复合镀层的硬度,考察了电流密度、纳米Al2O3浓度、电镀温度及镀液pH对镀层硬度的影响,分别借助SEM分析技术及电化学测试技术对最大硬度镀层进行微观性能及耐蚀性能进行研究。结果表明,纳米Al2O3弥散分布在镀层中,复合镀层晶粒进一步细化,耐蚀性显著提高。
|
| 关 键 词： | 纳米复合镀 电沉积 Ni-Co合金镀层 硬度 耐蚀性 |
| 收稿时间： | 2014/8/20 0:00:00 |
| 修稿时间： | 2014/8/28 0:00:00 |
Study of Preparation of Ni-Co-Al2O3 Nanocomposite Coating by Electro-deposition |
| |
| Wang Yiyong,Su Jianming,Han Chufei,Jin Hui,Zhang Junwei,Song Hua and Li Jidong.Study of Preparation of Ni-Co-Al2O3 Nanocomposite Coating by Electro-deposition[J].Nonferrous Metals(Extractive Metallurgy),2015(2):53-57. |
| |
| Authors: | Wang Yiyong Su Jianming Han Chufei Jin Hui Zhang Junwei Song Hua and Li Jidong |
| |
| Affiliation: | Laser Advanced Manufacturing Technology Center,,,,,, |
| |
| Abstract: | Ni-Co-Al2O3 nanocomposite coating was prepared by electro-deposition. The hardness was determined by micro-hardness tester. The effects of current density, concentration of nano-Al2O3 particle, and temperature and pH value of plating solution on hardness of coating were investigated. The microstructure and corrosion resistance of the coating with the highest hardness value were investigated by SEM and electrochemical testing. The results indicate that nano-Al2O3 particles distribute in coating, grain of composite coating is further refined and performance of corrosion resistance is obviously improved. |
| |
| Keywords: | nanocomposite coating electro-deposition Ni-Co alloy coating hardness corrosion resistance |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《有色金属(冶炼部分)》浏览原始摘要信息 |
|
点击此处可从《有色金属(冶炼部分)》下载全文 |
|
