| 切边圆盘剪剪切过程的数值模拟和实验研究 |
| |
| 引用本文： | 景群平,贾海亮,双远华,杨博,金莉.切边圆盘剪剪切过程的数值模拟和实验研究[J].塑性工程学报,2010,17(5). |
| |
| 作者姓名： | 景群平 贾海亮 双远华 杨博 金莉 |
| |
| 基金项目： | 陕西省科技创新工程重大科技攻关项目 |
| |
| 摘 要： | 根据钢板剪切过程的变形特点,利用ANSYS/LS-DYNA建立切边圆盘剪剪切钢板的有限元模型,并进行弹塑性有限元分析。通过仿真计算,获得了钢板剪切过程中的应力-应变状态、变形和力能参数,并在某钢铁集团公司切边圆盘剪上对剪切力进行了测试,结果表明,有限元模拟结果可靠,可作为圆盘剪设计制造的依据。
|
| 关 键 词： | ANSYS/LS-DYNA 切边圆盘剪 测试 |
Numerical simulation and experimental study of the shearing process on trimming disc shear |
| |
| JING Qun-ping,JIA Hai-liang,SHUANG Yuan-hua,YANG Bo,JIN Li.Numerical simulation and experimental study of the shearing process on trimming disc shear[J].Journal of Plasticity Engineering,2010,17(5). |
| |
| Authors: | JING Qun-ping JIA Hai-liang SHUANG Yuan-hua YANG Bo JIN Li |
| |
| Abstract: | According to the deformation characteristics,a finite element model for steel plate shearing was established using ANSYS/LS-DYNA software,and the elastic-plastic finite element analysis was done.Through simulation,the stress-strain states,deformation,force and energy parameters were obtained.The trimming shear force was tested on a trimming disc shear.The test results show that the finite element simulation method is reliable,which can be used as basis for the design and manufacture of disc shear. |
| |
| Keywords: | ANSYS/LS-DYNA trimming disc shear test |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
