带槽轧辊在马鞍山钢铁公司的推广使用 |
| |
引用本文: | 张金良,朱广宏.带槽轧辊在马鞍山钢铁公司的推广使用[J].钢铁研究学报,2003,15(5):74-76. |
| |
作者姓名: | 张金良 朱广宏 |
| |
作者单位: | 马鞍山钢铁股份有限公司设备部,安徽,马鞍山,243003 |
| |
摘 要: | 为了进一步提高型钢的表面质量、降低轧辊消耗量、提高轧制产量。马鞍山钢铁公司在型钢轧机成品机架上推广使用了带槽轧辊,使型钢的表面质量得到了较大幅度的改善。轧制能力比平辊开槽平均提高了30%,较大幅度地降低了轧辊的消耗量。并获得了明显的经济效益。
|
关 键 词: | 带槽轧辊 表面质量 轧制能力 |
文章编号: | 1001-0963(2003)05-0074-03 |
修稿时间: | 2002年11月6日 |
Spread Application of Grooved Roll in Ma′anshan Iron and Steel Co |
| |
Abstract: | In order to enhance the surface quality of rolled sections, reduce roll consumption and increase production, the grooved rolls is applied in finishing stand of section mill. The rolling capacity per millimeter is increased by 30 %, and the obvious reduction of roll consumption is obtained. Therefore the remarkable economic benefits are achieved. |
| |
Keywords: | grooved roll surface quality rolling capacity |
本文献已被 CNKI 维普 万方数据 等数据库收录! |