首页 | 本学科首页   官方微博 | 高级检索  
     

W火焰锅炉的燃烧调整
引用本文:程智海,金鑫,张富祥,陈端雨,孟有,李世晓.W火焰锅炉的燃烧调整[J].动力工程,2009,29(2).
作者姓名:程智海  金鑫  张富祥  陈端雨  孟有  李世晓
作者单位:程智海,张富祥,陈端雨,CHENG Zhi-hai,ZHANG Fu-xiang,CHEN Duan-yu(上海发电设备成套设计研究院,上海,200240);金鑫,孟有,李世晓,JIN Xin,MENG You,LI Shi-xiao(阳城国际发电有限责任公司,阳城,048102)  
摘    要:对阳城国际发电有限责任公司6台W火焰锅炉的煤质燃烧特性、制粉系统和二次风配风结构进行了分析,得出锅炉出力无法达到额定负荷,在高负荷下需投油助燃的原因.在此基础上,对制粉系统和二次风挡板进行了调整和优化.调整后的运行结果表明:在燃用哈氏可磨系数为38和48的煤种时,都实现了锅炉不投油助燃带负荷至350 MW,同时锅炉效率明显提高,煤耗大幅下降.

关 键 词:W火焰锅炉  燃烧优化  分级燃烧  制粉系统优化

Combustion Adjusting of W Flame Boilers
CHENG Zhi-hai,JIN Xin,ZHANG Fu-xiang,CHEN Duan-yu,MENG You,LI Shi-xiao.Combustion Adjusting of W Flame Boilers[J].Power Engineering,2009,29(2).
Authors:CHENG Zhi-hai  JIN Xin  ZHANG Fu-xiang  CHEN Duan-yu  MENG You  LI Shi-xiao
Affiliation:1.Shanghai Power Equipment Research Institute;Shanghai 200240;China;2.Yangcheng International Electrical Power Co.;Ltd.;Yangcheng 048102;China
Abstract:Coal combustion characteristics,milling system and secondary air distributing structure of 6 sets of W flame boiler in Yangcheng International Electrical Power Co.,Ltd.were analyzed.And the reason that the boilers couldn't reach the rated load and oil had to be fed to assist burning under high load was obtained.Then the milling system and the secondary air baffle were adjusted and optimized.The operational results after adjustment show that the boilers can reach the load of 350MW without oil to assist burni...
Keywords:W flame boilers  combustion optimization  staged combustion  milling system optimization  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号