|
|||||
|
|
Sn-Based Self-Powered Ultrafast Perovskite Photodetectors with Highly Crystalline Order for Flexible Imaging Applications |
|
| Authors: | Miao He Zhuhua Xu Cong Zhao Yu Gao Kanghui Ke Na Liu Xiongxian Yao Feiyu Kang Yang Shen Liwei Lin Guodan Wei |
| Affiliation: | 1. Tsinghua-Berkeley Shenzhen Institute (TBSI), Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518000 P. R. China Institute of Materials Research, Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518000 P. R. China;2. Institute of Materials Research, Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518000 P. R. China;3. State Key Lab of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University, Beijing, 100084 P. R. China;4. Tsinghua-Berkeley Shenzhen Institute (TBSI), Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518000 P. R. China Department of Mechanical Engineering, University of California at Berkeley, Berkeley, CA, 94720 USA;5. Tsinghua-Berkeley Shenzhen Institute (TBSI), Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518000 P. R. China |
| Abstract: | Sn-based perovskite materials are promising lead-free alternatives in thin film photodetectors (PDs) for applications such as optical communications, night visions and biomedical near-infrared imaging systems. However, constructing Sn-based photodetectors with high sensitivity, ultrafast response, and good operation stability has been a challenge. Herein, the phenyl-ethyl ammonium (PEA+) additive is introduced in pristine FASnI3, which regulates the thin film growth, passivates the trap/defect states, prevents Sn2+/Sn4+oxidation, and releases the crystal strain. The Resulting FA0.8PEA0.2SnI3 thin films exhibit highly crystalline order and flexibility. A self-powered PD using FA0.8PEA0.2SnI3 as the active layer demonstrates excellent responsivity of 0.262 W−1, detectivity of 2.3 × 1011 Jones. And it possesses the fastest rise and decay time of 25 µs and 42 µs as compared with the state-of-art Sn-based perovskite PDs. The transient absorption spectroscopy analysis validates greatly reduced trapping states and defects of FASnI3 with the PEA+ film for ultrafast response. A flexible Sn-based perovskite PD without any encapsulation in air continuously shows ultrafast responses after 10,000 bending cycles. Meanwhile, a flexible imaging system can be realized by a 5 × 5 PD array with good sensing results. This study shows great potential in nontoxic and ultrafast Sn-based perovskite PDs for flexible imaging applications. |
| Keywords: | flexibility imaging photodetectors Sn-based perovskites ultrafast responses |