首页 | 本学科首页   官方微博 | 高级检索  
     

多通道数据实时采集标时系统设计
引用本文:杨俊强,毛征,曹锋,吕春花,齐南.多通道数据实时采集标时系统设计[J].国外电子测量技术,2011,30(3):29-32,36.
作者姓名:杨俊强  毛征  曹锋  吕春花  齐南
作者单位:1. 北京工业大学,北京,100124
2. 中国兵器装备研究院,北京,100089
摘    要:为适应某高炮靶场试验需要,设计了一种基于GPS守时的多通道数据采集标时系统,通过串口接收数据的同时为数据打上时间戳.系统通过多通道采集数据,支持RS232、RS422、RS485、光纤等多串口协议,且各通道波特率可分别设置;系统由GPS获得精确的秒级时间,毫秒级时间采用分频技术由内部定时器提供,并由GPS秒脉冲实时校正...

关 键 词:多通道  数据采集  GPS  秒脉冲  数据标时

Design of multi-channel real time data acquisition and time labeled system
Yang Junqiang,Mao Zheng,Cao Feng,Lv Chunhua,Qi Nan.Design of multi-channel real time data acquisition and time labeled system[J].Foreign Electronic Measurement Technology,2011,30(3):29-32,36.
Authors:Yang Junqiang  Mao Zheng  Cao Feng  Lv Chunhua  Qi Nan
Affiliation:1(1.Beijing University of Technology,Beijing 100124,China;2.China South Industries Research Academy,Beijing 100089,China)
Abstract:According to the requirements of the range test,a real time data acquisition and time labeled system is designed in this paper.Every byte acquired from the serial ports can be labeled the accurate time.Multi-channel data can be acquired synchronous and asynchronous by multi serial ports communication protocol,such as RS232,RS422 and RS485,and it’s channel baud rate can be set respectively.In the system,the time got from GPS can be accurated at second level,and the millisecond time can be obtained from the internal timer.The internal timer is adjusted by the pulses per second(PPS)signals of GPS.The experiment indicateds that this system can satisfy multi-channel serial data acquisition and label the real time on the data,and its performance is secure and reliable.
Keywords:GPS
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号