Low-voltage small-size double-arm MEMS actuator |
| |
Authors: | Biyikli N Damgaci Y Cetiner BA |
| |
Affiliation: | UNAM-Inst. of Mater. Sci. & Nanotechnol., Bilkent Univ., Bilkent; |
| |
Abstract: | The fabrication and characterisation of a double-arm cantilever-type metallic DC-contact MEMS actuator with low pull-down voltage are reported. Bi-layer TiW cantilevers with an internal stress gradient were fabricated using a microwave-compatible fabrication process. Owing to its small size, cantilever length (L = 5-50 mum) and width (W = 2-40 mum), i.e. ~10-100 times smaller in lateral dimensions than a standard MEMS actuator, this actuator showed actuation voltages lower than 10 V. RP measurements of the 10 mum-wide actuators yielded an average insertion loss less than 1 dB and isolation higher than 40 dB up to 25 GHz. The developed actuator is well suited for integration in reconfigurable microwave circuits and systems such as reconfigurable antennas and arrays. |
| |
Keywords: | |
|
|