| Abstract: | The computer program STGAP has been developed to estimate pin gaps in a fuel assembly for FUGEN. The program optionally computes the probable distribution of the pin gap between any adjacent pair of fuel pins, either at a desired location in an assembly or longitudinally averaged over the total effective length of a pin, based on the measured manufacturing and assembling tolerances in geometrical dimensions and mechanical properties of all the independent elements composing a fuel assembly. It also correlates the computed fuel gap distribution with the minimum critical heat flux ratio in the corresponding local subchannel. Sample calculations were performed for the probable distributions of the pin gaps between pairs of adjacent fuel pins in the outermost layer of a FUGEN fuel assembly using the program and satisfactory agreement was obtained with the corresponding measured distributions. |
