| 多摄像机传递位姿测量系统的软件设计与实现 |
| |
| 引用本文： | 晁志超,姜广文,伏思华,金岩.多摄像机传递位姿测量系统的软件设计与实现[J].光电工程,2011,38(4). |
| |
| 作者姓名： | 晁志超 姜广文 伏思华 金岩 |
| |
| 作者单位： | 晁志超,姜广文,伏思华,CHAO Zhi-chao,JIANG Guang-wen,FU Si-hua(国防科技大学,光电科学与工程学院,长沙,410073);金岩,JIN Yan(中国人民解放军91202部队,辽宁,葫芦岛,125004) |
| |
| 基金项目： | 国家自然科学基金资助项目 |
| |
| 摘 要： | 传统的摄像测量技术用于测量物体三维位姿及其变形时,通常只能应用于可通视的物体之间或处于同一个视场的物体之间.多摄像机接力传递位姿测量通过接力传递的方式,可以实现对大型结构体中不通视物体之间或大视场范围内物体之间的位姿及其变形进行测量.本文首先对多摄像机接力传递位姿测量方法的基本原理进行了阐述;然后,通过对其硬件结构特点进行分析,提出了相应的软件功能模块与程序控制流程;最后,按照经典的"客户机-服务器"模式分别开发设计了分机软件和主机软件,并用Visual C++语言予以实现.经过大量室内.、室外及海上实船实验证明,该软件系统操作简单,使用方便,运行稳定可靠,可扩展性较强.
|
| 关 键 词： | 摄像测量 位姿测量 多摄像机 软件设计与实现 |
Software Design and Realization for the Pose Relay Measurement System Using Multi-cameras |
| |
| CHAO Zhi-chao,JIANG Guang-wen,FU Si-hua,JIN Yan.Software Design and Realization for the Pose Relay Measurement System Using Multi-cameras[J].Opto-Electronic Engineering,2011,38(4). |
| |
| Authors: | CHAO Zhi-chao JIANG Guang-wen FU Si-hua JIN Yan |
| |
| Affiliation: | CHAO Zhi-chao1,JIANG Guang-wen1,FU Si-hua1,JIN Yan2(1.Opto-Electronic Science and Engineering,National University of Defence Technology,Changsha 410073,China,2.Chinese People's Liberation Army 91202 Unit,Huludao 125004,Liaoning Province,China) |
| |
| Abstract: | Traditional videometric approach could not be used to measure the pose deformation of objects in a large viewing field or between intervisible objects in the large structures.Pose Relay Measurement System Using Multi-cameras(PRMSUMC) could be used to overcome the difficulties encountered in applying traditional videometric to deformation measurement between non-intervisible objects.First,basic principle of PRMSUMC was discussed.Then,functional module as well as flow chart of the software design was proposed... |
| |
| Keywords: | videometric pose measurement multi-cameras software design and realization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
