Advanced Secured Routing Algorithm of Vehicular Ad-Hoc Network

The cross extension of hydraulic fracture and natural fracture is the key to realize the volume fracture in unconventional reservoir. Based on the non-continuum theory, with the help of numerical simulation algorithm, a mathematical model for in-situ stress about fracturing expansion when the hydraulic fracture intersects with a natural fracture is presented. Then, using two-dimensional linear elastic theory verify the validity of degenerate in-situ stress mode. So it makes the natural fissure error about natural fracture surface pressure less than 1%. As a result, the accuracy of the model was proved. On the basis of the above, considering fluid-structure coupling effect, the stress change rules on natural fracture surface are obtained during hydraulic fracture extension process. The calculation results are as follows: In the process of hydraulic fracture approaching natural fracture, the surface of natural fracture occurs shear deformation first, and then turns into open deformation. Under the influence of shear deformation, the direction of the maximum principal stress on natural fracture surface is the same as initial horizontal maximum principal geostress. Due to the expansion of hydraulic fracture and fracture tip concentration effect, the maximum principal stress appears in the hydraulic fracture tip, this two points may induce the natural fracture begin to extend. And for initial ground stress in a stratum, the smaller the difference, the greater the pressure required to open the natural fracture. At this time, the maximum principal stress on the surface of the natural fracture is less concentrated; multiple fracture initiations are easily formed. Under high pressure, when the approaching angle between natural fracture and hydraulic fracture closes to 45° hydraulic fracture is easier to activate natural fracture, the formed hydraulic fracture shape is more complicated.