| 在滚齿机上加工插齿刀的方法 |
| |
| 引用本文： | 李英平. 在滚齿机上加工插齿刀的方法[J]. 制造技术与机床, 1997, 0(5): 36-37 |
| |
| 作者姓名： | 李英平 |
| |
| 作者单位： | 西安航空发动机公司工学院 |
| |
| 摘 要： | 在Y38型滚齿机上，增加一条径向进给内联系传动链，可实现在滚刀垂直进给运动的同时，使刀架立柱作径向进给运动，从而满足加工插齿刀时所需的机动径向进给运动。文中对机动径向进给运动链进行了换置计算，并给出了换置挂轮的计算结果。
|
| 关 键 词： | 内联系传动链 机动径向进给 滚齿机 插齿刀 加工 |
Machining of Gear Shaping Cutter on Ger Hobbing Machine |
| |
| Li Yingping. Machining of Gear Shaping Cutter on Ger Hobbing Machine[J]. Manufacturing Technology & Machine Tool, 1997, 0(5): 36-37 |
| |
| Authors: | Li Yingping |
| |
| Affiliation: | Li Yingping |
| |
| Abstract: | A radial feed performed by internal link driving chain is added to a Y38 gear hobbing machine, the tool post column will realize radial feed while the hob is feeding vertically. Then, the radial feed which is needed by machining a gear shaping cutter can be accomplished. A calculation is made. to the radial feed kinematic link, it also gives the calculated result for change gear. |
| |
| Keywords: | Internal Link Driving Chain Radial Feed Gear Hobbing Machine Gear Shaping Cutter Machining |
| 本文献已被 CNKI 维普 等数据库收录！ |
