Planar near-field scanning in the time domain .2. Sampling theoremsand computation schemes

For part 1 see ibid. vol.47, no.9, p.1280 (1994). Two computation schemes for calculating the far-field pattern in the time domain from sampled near-field data are developed and applied. The sampled near-field data consists of the values of the field on the scan plane measured at discrete times and at discrete points on the scan plane. The first computation scheme is based on a frequency-domain near-field to far-field formula and applies frequency-domain sampling theorems to the computed frequency-domain near field. The second computation scheme is based on a time-domain near-field to far-field formula and computes the time-domain far field directly from the time-domain near field. A time-domain sampling theorem is derived to determine the spacing between sample points on the scan plane. The computer time for each of the two schemes is determined and numerical examples illustrate the use and the general properties of the schemes. For large antennas the frequency-domain computation scheme takes less time to compute the full far field than the time-domain computation scheme. However, the time-domain computation scheme is simpler, more direct, and easier to program. It is also found that planar time-domain near-field antenna measurements, unlike single-frequency near-field measurements, have the capability of eliminating the error caused by the finite scan plane, and thus can be applied to broadbeam antennas