| 压延锦纶帘布打褶原因分析及解决措施 |
| |
| 引用本文： | 刘海利,靳湘如.压延锦纶帘布打褶原因分析及解决措施[J].橡胶科技市场,2013(3):38-41. |
| |
| 作者姓名： | 刘海利 靳湘如 |
| |
| 作者单位： | 风神轮胎股份有限公司,河南焦作454003 |
| |
| 摘 要： | 分析轮胎生产中压延锦纶帘布打褶的原因,并提出相应的解决措施。通过改造制动线路,在帘布卷取结束、摆架换工位时释放电机抱闸;采用风控制动盘调节垫布张力;卷取卷径采用直流调速器和中心卷取控制,卷取卷径张力锥度递减控制等措施,帘布打褶现象明显减少,帘布有形耗损率下降到0.4%。
|
| 关 键 词： | 锦纶帘布 打褶 压延 有形耗损 轮胎 |
Cause Analysis and Corrective Action of Winkles of Calendered Nylon Cord Fabric |
| |
| Liu Haili,Jin Xiangru.Cause Analysis and Corrective Action of Winkles of Calendered Nylon Cord Fabric[J].China Rubber Science and Technology Market,2013(3):38-41. |
| |
| Authors: | Liu Haili Jin Xiangru |
| |
| Affiliation: | ( Aeolus Tyre Co., Ltd., Jiaozuo 454003, China ) |
| |
| Abstract: | The causes of winkles of calendered nylon cord fabric during tire production were analyzed and the corrective actions were recommended. The brake system was modified to enable the motor holding brake at the end of cord winding and during work station change. The tension of cushion sheet was adjusted through air control brake. The winding diameter was monitored by DC converter, center-driven winding control, and taper tension control method. By taking the corrective actions, the winkles were reduced and the tangible loss decreased to 0.4%. |
| |
| Keywords: | nylon cord winkle calender tangible loss tire |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
