| Two-stage numerical simulation for temperature profile in furnace of tangentially fired pulverized coal boiler |
| |
| 引用本文： | 周乃君 徐琼辉 周萍. Two-stage numerical simulation for temperature profile in furnace of tangentially fired pulverized coal boiler[J]. 中南工业大学学报(英文版), 2005, 12(1): 97-101. DOI: 10.1007/s11771-005-0212-9 |
| |
| 作者姓名： | 周乃君 徐琼辉 周萍 |
| |
| 作者单位： | SchoolofEnergyandPowerEngineering,CentralSouthUniversity,Changsha410083,China |
| |
| 摘 要： | Considering the fact that the temperature distribution in furnace of a tangential fired pulverized coal boiler is difficult to be measured and monitored, two-stage numerical simulation method was put forward. First, multifield coupling simulation in typical work conditions was carried out off-line with the software CFX-4.3, and then the expression of temperature profile varying with operating parameter was obtained. According to real-time operating parameters, the temperature at arbitrary point of the furnace can be calculated by using this expression. Thus the temperature profile can be shown on-line and monitoring for combustion state in the furnace is realized. The simulation model was checked by the parameters measured in an operating boiler, DO130-9. 8/540. The maximum of relative error is less than 12% and the absolute error is less than 120℃, which shows that the proposed two-stage simulation method is reliable and able to satisfy the requirement of industrial application.
|
| 关 键 词： | 粉煤锅炉 燃烧监测 温度分布 数值模拟 |
| 收稿时间： | 2004-03-10 |
| 修稿时间： | 2004-06-11 |
Two-stage numerical simulation for temperature profile in furnace of tangentially fired pulverized coal boiler |
| |
| Zhou Nai-jun , Xu Qiong-hui and Zhou Ping. Two-stage numerical simulation for temperature profile in furnace of tangentially fired pulverized coal boiler[J]. Journal of Central South University of Technology, 2005, 12(1): 97-101. DOI: 10.1007/s11771-005-0212-9 |
| |
| Authors: | Zhou Nai-jun Xu Qiong-hui Zhou Ping |
| |
| Affiliation: | (1) School of Energy and Power Engineering, Central South University, 410083 Changsha, China |
| |
| Abstract: | Considering the fact that the temperature distribution in furnace of a tangential fired pulverized coal boiler is difficult to be measured and monitored, two-stage numerical simulation method was put forward. First, multi-field coupling simulation in typical work conditions was carried out off-line with the software CFX-4.3, and then the expression of temperature profile varying with operating parameter was obtained. According to real-time operating parameters, the temperature at arbitrary point of the furnace can be calculated by using this expression. Thus the temperature profile can be shown on-line and monitoring for combustion state in the furnace is realized. The simul-ation model was checked by the parameters measured in an operating boiler, DG130-9.8/540. The maximum of relative error is less than 12% and the absolute error is less than 120 ℃, which shows that the proposed two-stage simulation method is reliable and able to satisfy the requirement of industrial application. |
| |
| Keywords: | pulverized coal boiler combustion monitoring temperature distribution numerical simulation |
| 本文献已被 CNKI 维普 万方数据 SpringerLink 等数据库收录！ |
