A New Digital Echo Canceler for Two-Wire Full-Duplex Data Transmission

A new approach to echo canceling for two-wire fullduplex data transmission is proposed. The canceling signal is directly synthesized from the binary data, using a transversal filter approach, and the usual multiplications are replaced by additions and subtractions, thus allowing efficient operation of a large number of taps as required for the canceling of distant echoes. As a specific application, a system processing one sample per baud is discussed where timing signals at both communicating stations are assumed to be synchronized. A stochastic adjustment gradient-type algorithm is used for both training and adaptive tracking of the canceler. It is shown that convergence does not depend on intersymbol interference, timing phase, carrier phase, or the energy ratio of the local to the received signal, but is a function only of the number of taps. Convergence time is proportional to that number, and the optimum step size for fastest convergence is equal to the reciprocal of the number of taps. The residual fluctuation noise is proportional to that part of the mean-square (MS) error which cannot be reduced by the canceler and is a simple function of the product of the tap signal and the step size. The predicted convergence properties are verified by simulation results. Finally, it is shown how such an echo canceler might be used to allow two-wire full-duplex transmission for data rates as high as 4800 bit/s.