| X10-3水平井分段压裂优化技术研究 |
| |
| 引用本文： | 曾凡辉,郭建春,陈红军,赵金洲. X10-3水平井分段压裂优化技术研究[J]. 断块油气田, 2010, 17(1): 116-118 |
| |
| 作者姓名： | 曾凡辉 郭建春 陈红军 赵金洲 |
| |
| 作者单位： | 中国石化西南油气分公司工程技术研究院,四川,德阳,610800;西南石油大学油气藏地质及开发工程国家重点实验室,四川,成都,610500 |
| |
| 摘 要： | XIO-3水平井具有埋藏深、笼统全相位射开井段长、原油黏度高、水平井筒与油藏最大地应力方向不完全平行的特点。压裂改造时存在吸液孔数多、裂缝扭曲复杂、多裂缝发育、压裂液滤失严重、压裂液返排及生产时原油流动困难的问题。基于裂缝形态预测、储层地质精细划分、压裂水平井裂缝参数优选、投球分段压裂和施工压力预测等技术,形成了一套适合水平井长射孔段的低成本综合优化设计方法和分段压裂技术;通过采用大排量、高黏度前置液造缝,使用粉陶打磨孔眼和降滤失,优化压裂液性能,采用低密度支撑剂等手段,保证了施工的顺利实施。测试结果表明,压裂改造形成了4批次裂缝,产液量从压前抽汲9．7m^3·d^-1。变为自喷产液量20m^3·d^-1,获得了良好的增产效果。
|
| 关 键 词： | 水平井 分段压裂 地应力方向 优化设计 现场应用 |
Optimization of multi-interval fracturing technique in horizontal well X10-3 |
| |
| Zeng Fanhui,Guo Jianchun,Chen Hongjun,Zhao Jinzhou. Optimization of multi-interval fracturing technique in horizontal well X10-3[J]. Fault-Block Oil & Gas Field, 2010, 17(1): 116-118 |
| |
| Authors: | Zeng Fanhui Guo Jianchun Chen Hongjun Zhao Jinzhou |
| |
| Affiliation: | 1.Research Institute of Engineering Technology;Southwest Oil and Gas Company;SINOPEC;Deyang 618000;China;2.State Key Lab of Oil and Gas Reservoir Geology and Exploitation;Southwest Petroleum University;Chengdu 610500;China |
| |
| Abstract: | Horizontal well X10-3 is with the features of deep burial,long interval perforation length,oil with highviscosity and horizontal wellbore being not parallel to the maximium principal stress orientation.During fracturing there are diffculties of large imbibition perforation,fractures distortion and complex,multiply fractures development,serious fracture fluid filtration loss and the problems of post fracturing fluid recovery backflow and oil flowing during production.Using systematic optimization procedure,c... |
| |
| Keywords: | horizontal well multi-interval fracturing orientation of earth stress optimal design field application. |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
