| 苏丹Palouge FPF区块含水原油热化学脱水特性研究 |
| |
| 引用本文： | 丁清苗,申 莹,吕亳龙.苏丹Palouge FPF区块含水原油热化学脱水特性研究[J].石油化工高等学校学报,2014(2):88-92. |
| |
| 作者姓名： | 丁清苗 申 莹 吕亳龙 |
| |
| 作者单位： | [1]中国民航大学机场学院,天津300300 [2]新疆石油勘察设计研究院有限公司,新疆克拉玛依834000 [3]中国石油规划总院,北京100083 |
| |
| 摘 要： | 通过室内实验对加入不同类型破乳剂的苏丹Palouge FPF含水原油热化学沉降特性进行研究。结果表明,高效破乳剂TS-101最适合现场原油脱水,经过不同乳化条件乳化之后的不同含水率的稳定原油乳状液,加入TS-101破乳剂的最优破乳温度为80℃,最佳质量浓度为170~180mg/L,大部分试验油样在沉降13h后慢慢趋于稳定,沉降19h后全都符合预期脱后含水率低于5%的指标。
|
| 关 键 词： | 含水原油 高效破乳剂 破乳温度 热化学脱水 质量浓度 |
The Thermochemical Dehydration Characteristics of Sultan Palouge FPF Crude Oil Emulsion |
| |
| Affiliation: | Ding Qingmiao, Shen Ying, Lyu Bolong (1.Airport College, Civil Aviation University of China, Tianjin 300300, China 2.Xinjiang Petroleum Investigation Design and Research Institute (Co., Ltd.), Karamay Xinjiang 834000, China 3.PetroChina Planning and Engineering Institute, Beijing 100083, China) |
| |
| Abstract: | The thermochemical settlement characteristics of Sudan Palouge FPF water cut crude oil joined different types of demulsifier through the indoor experiment was studied.The results show that：for the crude oil emulsion with different water content on different emulsification condition,the best emulsion breaking temperature for the demulsifier TS-101 is 80 ℃,the optimum concentration is 170~180 mg/L,most of the oil samples tend to be stable after settled for 13 hours,19 hours later all of the oil samples met the target that the water content is less than 5% after dehydration. |
| |
| Keywords: | Crude oil emulsion Efficient demulsifier Emulsion breaking temperature Thermochemical dehydration characteristics |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
