| 焊接接头材料低周疲劳断口的分形分析 |
| |
| 引用本文： | 倪玉山,程光旭,匡震邦.焊接接头材料低周疲劳断口的分形分析[J].金属学报,1992,28(11):32-39. |
| |
| 作者姓名： | 倪玉山 程光旭 匡震邦 |
| |
| 作者单位： | 西安交通大学工程力学研究所，西安交通大学，西安交通大学 博士研究生西安(710049) |
| |
| 摘 要： | 对16MnR压力容器用钢焊接接头应变控制的低周疲劳试验,运用计算机视觉系统测量疲劳断裂粗糙表面,用二维变差法(Variation Method)计算了断口(焊缝金属和焊接热影响区)的Hausdorff维数,发现其随循环滞回能的增加而降低,焊接热影响区断口的Hausdorff维数的变化比焊缝金属断口的Hausdorff维数变化大;建立了疲劳寿命同Hausdorff维数的关系,说明分形维数愈大疲劳寿命愈长。
|
| 关 键 词： | 焊接接头 低周疲劳断口 分形分析 |
| 收稿时间： | 1992-11-18 |
| 修稿时间： | 1992-11-18 |
FRACTAL ANALYSIS OF FRACTURE SURFACE OF WELDING JOINT UNDER LOW CYCLE FATIGUE |
| |
| NI Yushan,CHENG Guangxu,KUANG Zhenbang.FRACTAL ANALYSIS OF FRACTURE SURFACE OF WELDING JOINT UNDER LOW CYCLE FATIGUE[J].Acta Metallurgica Sinica,1992,28(11):32-39. |
| |
| Authors: | NI Yushan CHENG Guangxu KUANG Zhenbang |
| |
| Affiliation: | Xi'an.iaotong University |
| |
| Abstract: | Hausdorff dimension of fracture surface roughness of welding joint, both weld metal and heat-affected zone, of pressure vessel steel 16MnR, tested under strain-controlled low-cycle fatigue, was examined with computer vision system and by two-dimensional variation method. Results show that it decreases with the increase of cyclic hysteresis energy. The Hausdorff dimension variation at heat-affected zone is higher than that of weld metal. It is believed that the higher the fractal dimension is, the longer the fatigue life will be. |
| |
| Keywords: | welding joint low-cycle fatigue fractograph Hausdorff dimension |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《金属学报》浏览原始摘要信息 |
|
点击此处可从《金属学报》下载全文 |
|
