Modeling linear guide systems with CoFEM: equivalent models for rolling contact

Today’s machine tools are highly complex mechatronic systems capable to exert large translational and rotatory movements. In most cases rolling bearings are used to connect the moving parts to each other. As full FE models of rolling bearings can consume a large amount of degrees of freedom (DOF) efficient methods for reducing the DOF consuming rolling elements to more simple equivalent models are needed. As an example a linear guide system is used. A special feature of the considered linear guide is that the runner block consists of three separate parts, which are hold together only by pretension and friction. FE simulations of such linear guide system were not reported before in the literature. Beside the full FE model three equivalent contact models are presented. The first two equivalent contact models feature novel characteristics. Advantages and disadvantages of the equivalent models are discussed using as reference a slice of the full model and simulation results of static stiffness. The validation of the numerical models is also done using the general analytical solution of Hertz.