| 坐标测量机上圆度误差包容评定的算法 |
| |
| 引用本文： | 侯宇,赵文乐,吕进.坐标测量机上圆度误差包容评定的算法[J].中国计量学院学报,1992(2). |
| |
| 作者姓名： | 侯宇 赵文乐 吕进 |
| |
| 作者单位： | 中国计量学院机械量计量系，中国计量学院机械量计量系，中国计量学院机械量计量系 |
| |
| 摘 要： | 本文把最小外接圆、最大内接圆和最小区域圆度误差的评定问题都表述为minimax 问题,并建立线性数学模型,采用统一的方法求解。实践表明本文方法通用、有效、稳定,适用于坐标测量机。
|
| 关 键 词： | 坐标测量机 圆度误差 |
An Algorithm for the Envelope Estimation of Circularity Tolerances on CMMs |
| |
| Hou Yu Zhao Wenle Lu Jin.An Algorithm for the Envelope Estimation of Circularity Tolerances on CMMs[J].Journal of China Jiliang University,1992(2). |
| |
| Authors: | Hou Yu Zhao Wenle Lu Jin |
| |
| Affiliation: | Dept.of Mechanical and Dimensional Measurement |
| |
| Abstract: | ——The evaluations of circularity tolerances with the minimum circumcircle,maximum incircle and minimum region are expressed by a universal form of mini—maximum problem.The lin ear math models are established and the three problems are solved by the common method.Practical application shows that the new algorithm has advantages of wide suitability,high efficiency,and good stability,and therefore can be applied to coordinate measuring machines. |
| |
| Keywords: | coordinate measuring machine circularity tolerance |
| 本文献已被 CNKI 等数据库收录！ |
