|
|||||
|
|
| 子午线轮胎成型过程有限元仿真分析 | |
| 引用本文： | 王国林,张建,朱美林,杜小伟,安登峰. 子午线轮胎成型过程有限元仿真分析[J]. 橡胶工业, 2012, 59(6): 352-356 |
| 作者姓名： | 王国林 张建 朱美林 杜小伟 安登峰 |
| 作者单位： | 1. 江苏大学汽车与交通工程学院,江苏镇江,212013 2. 江苏科技大学机械工程学院,江苏镇江,212003 3. 风神轮胎股份有限公司,河南焦作,454003 |
| 基金项目： | 高等学校博士点基金，江苏省六大人才高峰项目 |
| 摘 要： | 利用ABAQUS软件对12.00R20全钢载重子午线轮胎的成型过程进行有限元模拟。采用Marlow模型模拟生胶的力学性能,Rebar单元模拟钢丝帘线对橡胶的加强作用,解析刚体模拟成型机的主毂和辅助毂,分析轮胎成型过程中橡胶部件的贴合工艺和胎坯的成型过程。结果表明,模拟结果与理论设计轮胎结构具有良好的一致性,可以为生产工艺设计提供指导。 |
| 关 键 词： | 子午线轮胎 成型过程 有限元分析 |
Finite Element Simulation and Analysis of Radial Tire Building Process |
|
| WANG Guo-lin,ZHANG Jian,ZHU Mei-lin,DU Xiao-wei and AN Deng-feng. Finite Element Simulation and Analysis of Radial Tire Building Process[J]. China Rubber Industry, 2012, 59(6): 352-356 | |
| Authors: | WANG Guo-lin ZHANG Jian ZHU Mei-lin DU Xiao-wei AN Deng-feng |
| Affiliation: | 1.Jiangsu University,Zhenjiang 212013,China;2.Jiangsu University of Science and Technology,Zhenjiang 212003,China;3.Aeolus Tire Co.,Ltd,Jiaozuo 454003,China) |
| Abstract: | The building process of 12.00R20 radial tire was simulated by using ABAQUS software.The mechanical behavior of raw rubber was described by Marlow model,Rebar elements were used to model steel wire in the rubber,and Hubs of tire building machine were simplified by using analytical rigid bodies.The bonding process of rubber parts and building process of green tire were simulated and analyzed.The simulated results had good accordance with theoretical design,and could be used to guide manufacturing process design. |
| Keywords: | radial tire building process finite element analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |
| 点击此处可从《橡胶工业》浏览原始摘要信息 | |
| 点击此处可从《橡胶工业》下载免费的PDF全文 | |