| 正交车铣工件表面粗糙度的试验研究 |
| |
| 引用本文： | 闫家超,李海峰. 正交车铣工件表面粗糙度的试验研究[J]. 制造技术与机床, 2012, 0(5): 119-121 |
| |
| 作者姓名： | 闫家超 李海峰 |
| |
| 作者单位： | 沈阳理工大学,辽宁沈阳,110159 |
| |
| 基金项目： | 辽宁省自然基金资助项目(20092058);辽宁省教育厅创新团队基金资助项目(2009T082);沈阳市科技局应用基础研究项目(F10-205-1-14) |
| |
| 摘 要： | 正交车铣是一种新的切削加工方法,通过试验研究了轴向进给量、周向进给量、切削深度和切削速度等参数对表面粗糙度的影响规律.结果表明,轴向和周向进给量的增大都可导致已加工件表面粗糙度值增大,切削深度和切削速度的变化对表面粗糙度的影响不显著.
|
| 关 键 词： | 正交车铣 表面粗糙度 轴向进给量 切削速度 |
Experimental research on surface roughness of workpiece by orthogonal turning-milling |
| |
| YAN Jiachao , LI Haifeng. Experimental research on surface roughness of workpiece by orthogonal turning-milling[J]. Manufacturing Technology & Machine Tool, 2012, 0(5): 119-121 |
| |
| Authors: | YAN Jiachao LI Haifeng |
| |
| Affiliation: | (Shenyang Ligong University, Shenyang 110159, CHN) |
| |
| Abstract: | Orthogonal turning-milling is a new cutting method. The influence is researched on cutting parameters, such as axial feed, circumference feed, cutting depth and cutting speed, to surface roughness by experiment. The result shows that the surface roughness will rise when the axial feed and circumference feed increase, and the influence of the cutting speed and cutting depth on the surface roughness isn′t obvious. |
| |
| Keywords: | Orthogonal Turning-milling Surface Roughness Axial Feed Cutting Speed |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
