首页 | 本学科首页   官方微博 | 高级检索  
     

工作面长度对综放工作面瓦斯抽排影响的模拟
引用本文:秦伟,许家林,吴仁伦,胡国忠,王中伟. 工作面长度对综放工作面瓦斯抽排影响的模拟[J]. 煤矿安全, 2013, 44(6): 9-11
作者姓名:秦伟  许家林  吴仁伦  胡国忠  王中伟
作者单位:煤炭资源与安全开采国家重点实验室,江苏徐州 221008;中国矿业大学矿业工程学院,江苏徐州 221116
基金项目:国家自然科学基金重点资助项目,煤炭资源与安全开采国家重点实验室自主研究课题资助项目,江苏高校优势学科建设工程资助项目
摘    要:以阳泉三矿K8206综放面为例,利用Fluent模拟软件研究了不同工作面长度条件下"U+I型通风"模式的瓦斯治理效果。结果表明,随着工作面长度的增加,本煤层及邻近层瓦斯涌出量增大,漏风量增大,造成回风、内错尾巷瓦斯浓度超限;随着工作面长度的增加,风排瓦斯总量中来自本煤层的瓦斯所占比重增大。

关 键 词:工作面长度  多孔介质  数值模拟  瓦斯抽排  瓦斯治理

Simulation on Effect of Working Face Length on Gas Drainage and Discharging of Fully Mechanized Caving Face
Abstract:According to the practical situation of K8206 working face in Yangquan NO.3 Mine,gas control effect of " U + I ventilation" model under different working face lengths are studied by using FLUENT software.Simulation results show that gas emission quantity of mining-coal seam and adjacent seams increase with the increase of working face length.Gas concentration exceeds the limit in return airway and gas tail gateway,because of the increase of air leakage rate and air leakage scope with working face length.As the working face length increases,the percentage of the gas emission quantity from mining-coal bed increases also.
Keywords:working face length  porous media  numerical simulation  gas drainage and discharging  gas controlling
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号