首页 | 本学科首页   官方微博 | 高级检索  
     

煤层开采后覆岩导水裂隙带高度的模拟研究
引用本文:仇圣华,杨志锡,刘光照,曹福辉,刘猛,褚衍江. 煤层开采后覆岩导水裂隙带高度的模拟研究[J]. 煤矿安全, 2013, 44(6): 34-36
作者姓名:仇圣华  杨志锡  刘光照  曹福辉  刘猛  褚衍江
作者单位:1. 上海应用技术学院城市建设与安全工程学院,上海,201418
2. 新汶矿业集团公司翟镇煤矿,山东新泰,271204
3. 山东丰源远航煤业有限公司,山东滕州,277518
基金项目:上海市教委重点学科资助项目,上海市教委资助项目
摘    要:某矿为安全开采煤炭资源,采用经验公式预计和计算机数值模拟方法,按规划设计开采煤层厚度分别研究了单独开采16#煤、17#煤后覆岩导水裂隙带高度,采用经验公式计算为36.1m和29.7 m;采用计算机模拟方法计算为37.1 m、26.9m。研究了按规划设计开采煤层厚度将16#煤、17#煤全采后覆岩导水裂隙带高度为41.7 m。

关 键 词:导水裂隙带高度  计算机模拟  覆岩破坏  “三带”高度

Simulation Study on the Height of Water Flowing Fractured Zone After Coal Seam Mining
Abstract:For the safe mining of coal resource,depending on the designing mining height,a mine applied the two methods of empirical formula and numerical simulation to study the height of water flowing fractured zone of 16# and 17# coal seams which are exploited alone.The result shows that these two values are 36.1 m and 29.7 m according to the empirical formula,and 37.1 m and 26.9 m according to computer simulation.Depending on the designing mining height,the height of water flowing fractured zone of 16# and 17# coal seams after mining is 41.7 m according to computer simulation.
Keywords:the height of water flowing fractured zone  computer simulation  overburden rock failure  "   three zones"   height
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号