首页 | 本学科首页   官方微博 | 高级检索  
     

反分析法确定钢纤维水泥砂浆的拉伸残余强度
引用本文:陈升平,Tan Kiang Hwee. 反分析法确定钢纤维水泥砂浆的拉伸残余强度[J]. 武汉理工大学学报, 2007, 29(5): 82-85
作者姓名:陈升平  Tan Kiang Hwee
作者单位:1. 湖北工业大学土木与建筑学院,武汉,430068
2. 新加坡国立大学土木系,新加坡,117576
基金项目:湖北省教育厅科研项目;湖北省自然科学基金
摘    要:根据三点弯曲缺口梁的荷载与裂缝张开位移曲线,用反分析法确定了钢纤维水泥砂浆的拉伸残余强度。试验制作了5种不同体积含量的钢纤维水泥砂浆试件。采用虚拟裂缝模型用有限元法数值模拟了三点弯曲缺口梁的荷载与裂缝张开位移,用反分析法确定了钢纤维水泥砂浆的弹性模量和拉伸残余强度。研究结果表明,数值模拟得到的钢纤维水泥砂浆弹性模量以及三点弯曲缺口梁荷载与裂缝张开位移曲线均与试验结果吻合较好,且在常用的钢纤维含量范围内,钢纤维水泥砂浆的残余强度与钢纤维含量基本上成正比。

关 键 词:钢纤维水泥砂浆  虚拟裂缝模型  反分析  拉伸残余强度
文章编号:1671-4431(2007)05-0082-04
修稿时间:2006-10-26

Using Inverse Analysis to Determine the Residual Tensile Strength of SFRM
CHEN Sheng-ping,Tan Kiang Hwee. Using Inverse Analysis to Determine the Residual Tensile Strength of SFRM[J]. Journal of Wuhan University of Technology, 2007, 29(5): 82-85
Authors:CHEN Sheng-ping  Tan Kiang Hwee
Affiliation:1.School of Civil Engineering, Hubei University of Technology, Wuhan 430068, China;2. Department of Civil Engineering, National University of Singapore, Singapore 117576
Abstract:The residual tensile strength of steel fiber reinforced mortar(SFRM) was determined by inverse analysis by using load versus crack mouth opening displacement(CMOD) curve from notched beam tests.Five series of SFRM with different volume fractions were tested.The load-CMOD curve was numerically obtained by using finite element method,then the elastic modulus and residual tensile strength of SFRM were determined by using inverse analysis.It was shown that the simulated elastic modulus and load-CMOD curve were both in good agreement with experimental results.Furthermore,it was found that the residual tensile strength of SFRM was approximately proportional to the volume fraction of steel fibers.
Keywords:steel fiber reinforced mortar   fictitious crack model   inverse analysis   residual tensile strength
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号