Abstract: | Montmorillonite (MMT) clay modified with lanthanum (La) ions and Fe3 O4 nanoparticles was proposed for the effective removal of phosphate ions from aqueous solution. Characterisation of the adsorbent using FTIR, SEM, XRD, XPS, XRF, BET and VSM techniques were carried out. The effects of initial phosphate concentration, contact time, dosage and pH on the phosphorus adsorption were investigated. La‐MMT/Fe3 O4 exhibited an excellent adsorption capacity of up to 14.35 mg/g, with 97.8% removal within 60 min. Langmuir isotherm model fits well with the equilibrium isotherm data, with a maximum adsorption capacity of 15.53 mg/g at room temperature. The kinetic study was well fitted with pseudo‐second‐order kinetics, and the adsorption rate was mainly controlled by liquid‐film diffusion. The manufactured adsorbent was effectively regenerated using 0.1 M NaOH solutions, with 90.18% adsorption efficiency remaining after six adsorption/desorption cycles. These results demonstrate that La‐MMT/Fe3 O4 provides an example of regenerable high‐performance adsorbents for removal of PO4 3− from wastewater.Inspec keywords: wastewater treatment, desorption, phosphorus, pH, recycling, adsorption, X‐ray diffraction, iron compounds, nanoparticles, X‐ray photoelectron spectra, clay, scanning electron microscopy, reaction kinetics theory, X‐ray fluorescence analysis, chemical engineering, chemical equilibrium, Fourier transform infrared spectra, sodium compounds, lanthanum, liquid films, diffusionOther keywords: maximum adsorption capacity, high‐performance adsorbents, recyclable adsorbents, lanthanum‐modified montmorillonite, montmorillonite clay, Langmuir isotherm model, phosphate removal, aqueous solution, FTIR spectroscopy, SEM, XRD, XPS, XRF, BET, VSM techniques, pH value, equilibrium isotherm data, pseudo second‐order kinetics, liquid‐film diffusion, adsorbent regeneration, adsorption‐desorption cycles, wastewater treatment, temperature 293.0 K to 298.0 K, time 60.0 min, NaOH, La, P |