| 注射成型Al2O3陶瓷喂料的制备工艺 |
| |
| 引用本文： | 刘志锋,雅菁,王鹤琨,辛颖,王为. 注射成型Al2O3陶瓷喂料的制备工艺[J]. 天津城市建设学院学报, 2009, 15(4): 293-296 |
| |
| 作者姓名： | 刘志锋 雅菁 王鹤琨 辛颖 王为 |
| |
| 作者单位： | 1. 天津大学,化工学院,天津,300072;天津城市建设学院,材料科学与工程系,天津,300384
2. 天津城市建设学院,材料科学与工程系,天津,300384 |
| |
| 摘 要： | 研究了Al2O3陶瓷注射成型喂料的制备工艺，探讨了加料顺序、混炼温度、混炼时间等参数对喂料性能的影响．结果表明：先对PP、PE混炼，再逐渐加入预先搅拌好的PL与Al2O3、DBP、SA的混合物，最后混炼0．5h，即得较均匀的注射喂料．
|
| 关 键 词： | Al2O3 陶瓷注射成型 喂料 |
Study on Feedstock Preparation of Al2O3 Ceramic for Injection Molding |
| |
| LIU Zhi-feng,YA Jing,WANG He-kun,XIN Ying,WANG Wei. Study on Feedstock Preparation of Al2O3 Ceramic for Injection Molding[J]. Journal of Tianjin Institute of Urban Construction, 2009, 15(4): 293-296 |
| |
| Authors: | LIU Zhi-feng YA Jing WANG He-kun XIN Ying WANG Wei |
| |
| Affiliation: | 1. School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China; 2. Department of Materials Science and Engineering, TIUC, Tianjin 300384, China) |
| |
| Abstract: | The preparation of Al2O3 ceramic feedstock for injection molding was studied. And, the effects of mixing order, mixing temperature and mixing time on feedstock characteristics were also investigated. Results showed that the uniform injection feedstock could be obtained when PP and PE were mixed firstly, then the mixture of PL, Al2O3, DBP and SA was added and continually mixed for 0.5 h. |
| |
| Keywords: | Al2O3 |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
