|
|||||
|
|
| 离心铸造钛合金熔体补缩过程渗流流动物理模拟 | |
| 引用本文： | 隋艳伟,李邦盛,刘爱辉,郭景杰,傅恒志. 离心铸造钛合金熔体补缩过程渗流流动物理模拟[J]. 稀有金属材料与工程, 2009, 38(9): 1537-1541 |
| 作者姓名： | 隋艳伟 李邦盛 刘爱辉 郭景杰 傅恒志 |
| 作者单位： | 1. 中国矿业大学,江苏,徐州,221116;哈尔滨工业大学,黑龙江,哈尔滨,150001 2. 哈尔滨工业大学,黑龙江,哈尔滨,150001 3. 淮阴工学院,江苏,淮安,223003 |
| 基金项目： | 国家自然科学基金重点项目 |
| 摘 要： | 采用相似物理模拟法,研究了离心力场下钛合金熔体补缩过程中渗流流体体积的变化规律,并与大断面充型流动进行了对比.结果表明:随着补缩时间和旋转速度的增加,补缩过程中渗流流体体积增大;同时随着流体粘度和多孔介质孔眼数的减小,补缩过程中渗流流体体积也相应增大;当铸型顺时针旋转时,浇道左侧相对于右侧,先进行补缩渗流;补缩过程中渗流流动与大断面宏观充型流动相比,在相同时间内,渗流流体体积减少. |
| 关 键 词： | 离心铸造 钛合金 补缩 物理模拟 |
| 收稿时间： | 2008-09-19 |
Physical Simulation of Infiltration Flow during Centrifugal Casting Titanium Alloy Melts Feeding |
|
| Sui Yanwei,Li Bangsheng,Liu Aihui,Guo Jingjie and Fu Hengzhi. Physical Simulation of Infiltration Flow during Centrifugal Casting Titanium Alloy Melts Feeding[J]. Rare Metal Materials and Engineering, 2009, 38(9): 1537-1541 | |
| Authors: | Sui Yanwei Li Bangsheng Liu Aihui Guo Jingjie Fu Hengzhi |
| Affiliation: | China University of Mining and Technology, Xuzhou 221116, China);Harbin Institute of Technology, Harbin 150001, China;Huaiyin Institute of Technology, Huaian 223003, China;Harbin Institute of Technology, Harbin 150001, China;Harbin Institute of Technology, Harbin 150001, China |
| Abstract: | By means of similar physical simulation method, the variation of infiltration volume is thoroughly studied during titanium alloy melt feeding in centrifugal field, and compared with the big cross-section filling process. The results show that the infiltration volume in feeding process increases with increasing the feeding time and velocity or decreasing the fluid viscosity and eyelet number of porous medium. When the mould rotates clockwise, the left part relative to the right part in running channel starts feeding and infiltration firstly. The infiltration volume decreases against the big cross-section macro-filling flow in the same time. |
| Keywords: | centrifugal casting titanium alloy feeding physical simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |
| 点击此处可从《稀有金属材料与工程》浏览原始摘要信息 | |
| 点击此处可从《稀有金属材料与工程》下载全文 | |