| 金属和陶瓷配副件条件下TiN薄膜的摩擦学特性 |
| |
| 引用本文： | 谢红梅,张碧云,卢春灿,聂朝胤.金属和陶瓷配副件条件下TiN薄膜的摩擦学特性[J].表面技术,2008,37(3):9-11,32. |
| |
| 作者姓名： | 谢红梅 张碧云 卢春灿 聂朝胤 |
| |
| 作者单位： | 西南大学材料科学与工程学院,重庆,400715;西南大学材料科学与工程学院,重庆,400715;西南大学材料科学与工程学院,重庆,400715;西南大学材料科学与工程学院,重庆,400715 |
| |
| 基金项目： | 重庆市自然科学基金
,
西南大学校科研和教改项目 |
| |
| 摘 要： | 多弧离子镀TiN薄膜具有广泛的应用.采用多弧离子镀技术在不锈钢衬底表面沉积了TiN薄膜.用显微硬度计测试了TiN薄膜的硬度,用往复球-盘式摩擦磨损试验机评价了在GCr15和Si3N4两种不同配副件及空气中干摩擦条件下TiN薄膜的摩擦学性能,用表面轮廓仪测试了磨痕处的磨痕轮廓,用配有能谱仪(EDS)的扫描电镜(SEM)和X射线光电子能谱(XPS)观察和测试了磨痕形貌和磨痕处主要化学元素组成,用金相显微镜观察了配副件磨损表面形貌.结果表明:在不同配副件条件下,TiN薄膜的摩擦因数随速度和载荷的增加均出现了降低的趋势.而在相同速度和载荷下,以GCr15为配副件时TiN薄膜的摩擦因数小于以Si3N4为配副件时的摩擦因数.以Si3N4为配副件时TiN薄膜主要表现为磨粒磨损.以GCr15为配副件时TiN薄膜几乎没有磨损,而配副件GCr15主要表现为磨粒与粘着磨损.
|
| 关 键 词： | 配副件 TiN薄膜 摩擦学特性 |
| 收稿时间： | 3/3/2008 12:00:00 AM |
| 修稿时间： | 2008/6/10 0:00:00 |
Investigation on Tribological Properties of TiN Films at Different Counterparts |
| |
| XIE Hong-mei,ZHANG Bi-yun,LU Chun-can and NIE Chao-yin.Investigation on Tribological Properties of TiN Films at Different Counterparts[J].Surface Technology,2008,37(3):9-11,32. |
| |
| Authors: | XIE Hong-mei ZHANG Bi-yun LU Chun-can and NIE Chao-yin |
| |
| Affiliation: | School of Materials Science and Engineering, Southwest University, Chongqing 400715, China,School of Materials Science and Engineering, Southwest University, Chongqing 400715, China,School of Materials Science and Engineering, Southwest University, Chongqing 400715, China and School of Materials Science and Engineering, Southwest University, Chongqing 400715, China |
| |
| Abstract: | The applications of TiN films are extensive. TiN films on stainless steel substrate were repared using multi-arc ion plating technique. The surface hardness of the film was measured with micro hardness tester. The wear resistance of TiN films were studied using different counterparts by the ball-disk wear tester. Wear surface morphology of counterparts were investigated by OM. SEM, EDS and XPS were employed to characterize the morphology and chemical composition of wear grooves in the films. The analysis results show that the friction cofficent of TiN film is reduced with the increasement of velocity and load ot different counterparts. The friction coefficient of TiN films at counterpart of GCr15 ball is lower than that of TiN films at counterpart of Si3N4 ball in the same condition. Tribological mechanism of TiN films at counterpart of Si3N4 ball is abrasion, while TiN films at counterpart of GCr15 ball which exhibites abrasion and adherence is little wear. |
| |
| Keywords: | Counterpart TiN films Tribological properties |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《表面技术》浏览原始摘要信息 |
|
点击此处可从《表面技术》下载全文 |
|
